Polycarbonate PC Sheet application prospect of sunlight greenhouse prospect
In recent years, energy saving, environmental protection, green new plastic building materials with its superior hollow sunshine board physical properties, and in the building industry agricultural field play an increasingly important role. We can see, a lot of building lighting and ornaments materials are using Polycarbonate PC Sheet, such as commercial shopping center, the airport, stadiums, large parking lot, warehouse, greenhouse engineering. The sun the application engineering to board the world expo lighting project, small to commodity house the daylighting of the layer, the interval. Foot the application area visible how widely.
Now, the sunlight board to the construction of the greenhouse awning, vegetables, flowers greenhouse, greenhouse, ecology garden restaurant greenhouse, sightseeing greenhouse common occurance, the sun was honored with the charm of how board? We put aside Polycarbonate PC Sheet itself inherent board of good physical properties, from the droplets of sun came up performance know board material characteristics. The general greenhouse material in the room inside and outside had certain temperature difference will lead to water vapor condensed in the internal will greenhouse on the surface, form small droplets, such not only reduced the sunlight penetration rate, it is still possible to distill damage plants, product sincere the droplets sunshine board is special for greenhouse greenhouse custom-made2, the sun in the plate surface daub the special materials (the droplets layer), under the same conditions can make moisture from the air of condensate in uniform sheet surface and go down to the edge of the design good cant slippery, avoid drop damage plants, in order to achieve the effect of droplets.
2012年8月9日星期四
PVC plastic forming four characteristics
PVC plastic forming four characteristics
PVC plastic molding character:
1, amorphous materials, moisture absorption small, poor liquidity. In order to improve the liquidity, prevent the occurrence of bubbles, plastic can dry in advance. Mould casting system should be thick short, gate section is big, can not have blind Angle. Mould should be cooling, chromium plating surface.
2, because its corrosive and liquidity characteristics, had better use of special equipment and mold. All products must according to need to join different kinds and number of additives.
3, extremely easy decomposition, in 200 degrees temperature and steel. Copper contact easier to decompose, decomposition escaping corrosion. Excitant gas. Molding temperature range.
4, the screw injection machine nozzle, aperture is big, in case the blind Angle stagnation expected. Not with set piece, such as a set piece should be preheated.
It is popular in the world today are popular, and also be widely used a synthetic materials. Its global usage in various kinds of synthetic materials in high on the second.
In recent years, PVC plastic board in southeast Asia growth several degrees is particularly significant, thanks to southeast Asian countries have in infrastructure construction of urgent needs. Can production in 3 d surface film of materials, PVC is the most suitable materials. Proportion: 1.38 g/cubic centimeters, molding shrinkage rate: 0.6-1.5%, molding temperature: 160-190 ℃. PVC plastic board the full name is Polyvinylchlorid, ingredient for polyvinyl chloride, bright color, corrosion resistance, durable, due to the increase in manufacturing process of plasticizer, anti-aging agents some toxic auxiliary materials to enhance its heat resistance and toughness, and extendibility, so its products are not for food and medicine.
Features: mechanical performance, excellent electrical performance, acid and alkali resistant force is extremely strong, chemical stability, but softening point low. Suitable for making thin plate, electric wire and cable insulating layer, seals, etc.
PVC plastic molding character:
1, amorphous materials, moisture absorption small, poor liquidity. In order to improve the liquidity, prevent the occurrence of bubbles, plastic can dry in advance. Mould casting system should be thick short, gate section is big, can not have blind Angle. Mould should be cooling, chromium plating surface.
2, because its corrosive and liquidity characteristics, had better use of special equipment and mold. All products must according to need to join different kinds and number of additives.
3, extremely easy decomposition, in 200 degrees temperature and steel. Copper contact easier to decompose, decomposition escaping corrosion. Excitant gas. Molding temperature range.
4, the screw injection machine nozzle, aperture is big, in case the blind Angle stagnation expected. Not with set piece, such as a set piece should be preheated.
It is popular in the world today are popular, and also be widely used a synthetic materials. Its global usage in various kinds of synthetic materials in high on the second.
In recent years, PVC plastic board in southeast Asia growth several degrees is particularly significant, thanks to southeast Asian countries have in infrastructure construction of urgent needs. Can production in 3 d surface film of materials, PVC is the most suitable materials. Proportion: 1.38 g/cubic centimeters, molding shrinkage rate: 0.6-1.5%, molding temperature: 160-190 ℃. PVC plastic board the full name is Polyvinylchlorid, ingredient for polyvinyl chloride, bright color, corrosion resistance, durable, due to the increase in manufacturing process of plasticizer, anti-aging agents some toxic auxiliary materials to enhance its heat resistance and toughness, and extendibility, so its products are not for food and medicine.
Features: mechanical performance, excellent electrical performance, acid and alkali resistant force is extremely strong, chemical stability, but softening point low. Suitable for making thin plate, electric wire and cable insulating layer, seals, etc.
More information:www.ytfoam.com
2012年8月7日星期二
PVC plastic molding character
PVC plastic molding character
PVC plastic board the full name is Polyvinylchlorid, ingredient for polyvinyl chloride, bright color, resistant to corrupt and durable, due to the increase in manufacturing process of plasticizer, anti-aging agents some toxic auxiliary material to strengthen
The heat resistance and toughness, and extendibility, so their products generally does not store put food and medicine.
PVC plastic molding character:
1. The amorphous materials, moisture absorption small, poor liquidity. In order to improve the liquidity, prevent the occurrence of bubble son, plastic can dry in advance. Mould casting system should be thick short, clear the dust removal of dust fittings bag fittings note, gate section should be big, do not have a corner. Mould should be cooling, chromium plating surface.
2. Because of its corrupt sex and liquidity characteristics, had better use of special equipment and mold. All products must according to need to join different kinds and number of additives.
3. Extremely easy differentiation, in 200 degrees temperature and steel. Copper contact more differentiation, differentiation to escape corruption. Excitant gas. Molding temperature range.
4. The screw injection machine nozzle childhood, aperture is big, in case the blind Angle stagnation expected. Not with set piece, such as a set piece should be preheated.
It is when the contemporary world are loved, general vogue and also be widely used a synthetic materials. It seems the global in various $become useful to guess at the second. According to statistics, only 1995 a year, in the life of the European PVD
Production is about WuYiBaiWanDun, pressure tile machine, and the consumption is five million three hundred thousand tons. In Germany, the production and consumption PVD equal to one million four hundred thousand tons. PVD are with 4% of the increase in global rate have to production
And the application. In recent years the PVD increasing number of degrees in southeast Asia is especially significant, thanks to southeast Asia the capital have held the construction of infrastructure demand note, pipe fittings "copper alloy seamless tube" judge international progress for fathers brought forth level. Can production in 3 d surface film of material guess, PVD is the most suitable
Materials. Proportion: 1.38 g/cubic centimeters, molding tightening rate: 0.6-1.5%, molding temperature: 160-190 ℃.
Features: mechanical performance, excellent electrical performance, fitting leading enterprise mobilization elbow pipe fittings industry spanning development, acid and alkali resistant force is extremely strong, chemical stability, but softening point low. Suitable for making thin plate, electric wire and cable insulating layer, seals, etc.
PVC plastic board the full name is Polyvinylchlorid, ingredient for polyvinyl chloride, bright color, resistant to corrupt and durable, due to the increase in manufacturing process of plasticizer, anti-aging agents some toxic auxiliary material to strengthen
The heat resistance and toughness, and extendibility, so their products generally does not store put food and medicine.
PVC plastic molding character:
1. The amorphous materials, moisture absorption small, poor liquidity. In order to improve the liquidity, prevent the occurrence of bubble son, plastic can dry in advance. Mould casting system should be thick short, clear the dust removal of dust fittings bag fittings note, gate section should be big, do not have a corner. Mould should be cooling, chromium plating surface.
2. Because of its corrupt sex and liquidity characteristics, had better use of special equipment and mold. All products must according to need to join different kinds and number of additives.
3. Extremely easy differentiation, in 200 degrees temperature and steel. Copper contact more differentiation, differentiation to escape corruption. Excitant gas. Molding temperature range.
4. The screw injection machine nozzle childhood, aperture is big, in case the blind Angle stagnation expected. Not with set piece, such as a set piece should be preheated.
It is when the contemporary world are loved, general vogue and also be widely used a synthetic materials. It seems the global in various $become useful to guess at the second. According to statistics, only 1995 a year, in the life of the European PVD
Production is about WuYiBaiWanDun, pressure tile machine, and the consumption is five million three hundred thousand tons. In Germany, the production and consumption PVD equal to one million four hundred thousand tons. PVD are with 4% of the increase in global rate have to production
And the application. In recent years the PVD increasing number of degrees in southeast Asia is especially significant, thanks to southeast Asia the capital have held the construction of infrastructure demand note, pipe fittings "copper alloy seamless tube" judge international progress for fathers brought forth level. Can production in 3 d surface film of material guess, PVD is the most suitable
Materials. Proportion: 1.38 g/cubic centimeters, molding tightening rate: 0.6-1.5%, molding temperature: 160-190 ℃.
Features: mechanical performance, excellent electrical performance, fitting leading enterprise mobilization elbow pipe fittings industry spanning development, acid and alkali resistant force is extremely strong, chemical stability, but softening point low. Suitable for making thin plate, electric wire and cable insulating layer, seals, etc.
More information:www.ytfoam.com
2012年8月5日星期日
PVC co-extrusion foam board
PVC co-extrusion foam board
PVC co-extrusion epispastic board, the utility model involving a PVC co-extrusion foam board, it is by the micro foaming PVC and UPVC co-extrusion enhance sexual material molding of plate, plate material for PVC foaming ground floor and high strength the surface layer of UPVC bilayer structure, the cross section in the bottom plate ladder, mouth, one side of the plate with plug-and-socket grooves, the other side of the board and its corresponding with plug-and-socket convex stare blankly. The utility model PVC co-extrusion epispastic board is with micro foaming PVC and UPVC co-extrusion enhance sexual material molding of plank, it combines the advantages of wood and plastic in a body, not only have similar natural woodiness and natural stone material that appearance, have anticorrosive, moistureproof, insect-resistant eat by moth, size high stability, no crack, surface of impulse is strong, high hardness, flexibility is admirable, and a similar wood natural characteristic, can cut, adhesive, with nails or bolt connection. Plate surface layer of up to 50-200 μ m of fighting force, UPVC surface wear-resisting degree is high, not easy have Nick, foam layer density up d = 0.6 ~ 0.8 g/m
More information:www.ytfoam.com
2012年7月31日星期二
PVC plastic board is how to make and application
PVC plastic board is how to make and application
PVC is the abbreviation of PVC resin, PVC is linear thermoplastic polymer type. With PVC base makings, add plasticizer, stabilizer, pigments, fillers, lubricant, etc. In certain temperatures and the pinch, mixed refine, pull piece, cut grain, extrusion molding or die casting, cooling finalize the design is made of PVC plastic products after.
The product is of excellent thermal forming materials, can replace part of stainless steel and other corrosion resistance synthetic materials. Be widely used in chemical industry, petroleum, electroplating, water purification processing equipment, environmental protection equipment, mining, medicine, electronics, communication and decoration, etc.
PVC is the abbreviation of PVC resin, PVC is linear thermoplastic polymer type. With PVC base makings, add plasticizer, stabilizer, pigments, fillers, lubricant, etc. In certain temperatures and the pinch, mixed refine, pull piece, cut grain, extrusion molding or die casting, cooling finalize the design is made of PVC plastic products after.
The product is of excellent thermal forming materials, can replace part of stainless steel and other corrosion resistance synthetic materials. Be widely used in chemical industry, petroleum, electroplating, water purification processing equipment, environmental protection equipment, mining, medicine, electronics, communication and decoration, etc.
More information:www.ytfoam.com
2012年7月29日星期日
Polycarbonate PC Sheet the applicable scope of the sun and characteristics
Polycarbonate PC Sheet the applicable scope of the sun and characteristics
Polycarbonate PC Sheet of the flexibility of the sun and plasticity to be installed vaults and other surface materials ideal, therefore, bending radius of the plate thickness may be up to 175 times, (bending radius > 175 thickness)
Products applicable
Public construction, industrial building, civil building of beautification
Modern commercial building inside and outside decoration
The railway station, airport, waiting hall, and channel ceiling
City bus station, ferry wharf public service facilities cover and decoration
Garden, agricultural and indoor fish canopy
Skylight cellar arched roof and commercial shed roof
The modern garden of the game place and singular decoration and have a rest corridor hall
Pervious to light heat insulation and sound insulation barrier road row advertising, light box ads displayed exhibition layout, high-grade interior decoration board, walls, top, storage and maintenance.
Light weight: 10-14 kg/m2, equivalent to 1/30 of the brick wall
Heat insulation: core material coefficient of thermal conductivity: λ < = 0.041 w/mk.
High strength: for smallpox palisade structure plate bearing, bending compressive; General housing need not beam.
Bright color: no need to surface decoration, galvanized steel color coating keep period in 10-15 years.
Flexible installation fast: the construction period can be reduced by 40% or more.
The oxygen index: (OI) 32.0 (province of fire control products ZhiJianZhan).
Polycarbonate PC Sheet of the flexibility of the sun and plasticity to be installed vaults and other surface materials ideal, therefore, bending radius of the plate thickness may be up to 175 times, (bending radius > 175 thickness)
Products applicable
Public construction, industrial building, civil building of beautification
Modern commercial building inside and outside decoration
The railway station, airport, waiting hall, and channel ceiling
City bus station, ferry wharf public service facilities cover and decoration
Garden, agricultural and indoor fish canopy
Skylight cellar arched roof and commercial shed roof
The modern garden of the game place and singular decoration and have a rest corridor hall
Pervious to light heat insulation and sound insulation barrier road row advertising, light box ads displayed exhibition layout, high-grade interior decoration board, walls, top, storage and maintenance.
Light weight: 10-14 kg/m2, equivalent to 1/30 of the brick wall
Heat insulation: core material coefficient of thermal conductivity: λ < = 0.041 w/mk.
High strength: for smallpox palisade structure plate bearing, bending compressive; General housing need not beam.
Bright color: no need to surface decoration, galvanized steel color coating keep period in 10-15 years.
Flexible installation fast: the construction period can be reduced by 40% or more.
The oxygen index: (OI) 32.0 (province of fire control products ZhiJianZhan).
2012年7月26日星期四
PVC plastic board of properties and USES
PVC foam board of properties and USES
PVC foam board is made with plastic board, plastic for synthetic polymers, free to change form style. It has good chemical stability, strong corrosion resistance, hardness and high strength, uv (aging), refractory flame retardant (with self-extinguishing RTV silicone compound), insulation performance, reliable, and the surface is bright and clean, smooth, not bibulous, not deformation, easy to processing etc, and is of excellent thermal forming materials, can replace part of stainless steel and other corrosion synthetic materials, widely used in chemical industry, petroleum, electroplating, water purification processing equipment, environmental protection equipment, mining, extraction engineering, electronic circuit board, fire prevention board templates, baking-free brick to ask board, building template and advertisement and decoration, etc.
PVC plastic factory is mainly used for the decoration of its advantage is cheap, variety of designs is various, the construction is simple, fast speed, the disadvantage is not wear-resisting, high requirement of floor.
订阅：
博文 (Atom)